![background image](http://html.mh-extra.com/html/icom/ic-e7/ic-e7_instruction-manual_612426051.webp)
38
7
SCAN OPERATION
7
■
Auto memory write scan
This scan is useful for searching a speci
fi
ed frequency range
and automatically storing busy frequencies into memory
channels. The same frequency ranges used for program scan
are used for auto memory write scan.
q
Select
VFO mode
with
[V/M] (
SKIP
•
S
.
MW
)
, if necessary.
w
Push and hold
[CALL] (
MODE
•
SCAN
)
for 1 sec. to enter
scan type selection condition.
e
Rotate
[DIAL]
to select the desired scanning type.
• “ALL” for full scan; “BAND” for band scan, “PROGxx” for pro-
grammed scan (xx= 0 to 24; programmed scan edges numbers
only displayed)
r
Push
[CALL] (
MODE
•
SCAN
)
to start the scan.
t
Push
[V/M] (
SKIP
•
S
.
MW
)
to toggle the automatic memory
write function ON and OFF.
• “
” indicator blinks during auto memory write.
y
Push
[CALL] (
MODE
•
SCAN
)
to stop scan.
D
D
During auto-memory write scanning:
• When a signal is received, scan pauses and the frequency
is stored into auto memory write channel group (000
♦
–199
♦
).
- 2 short beeps sound when stored.
• Scan resumes after frequency storing.
• When all channels are stored, the scan cancels automati-
cally and 1 long beep sounds.
D
D
Re-calling the stored frequencies:
q
Push
[V/M] (
SKIP
•
S
.
MW
)
to select
memory mode
.
w
Push
[BAND] (
TS
•
LOCK
)
several times, or while pushing
and holding
[BAND] (
TS
•
LOCK
)
, rotate
[DIAL]
to select the
auto memory write channel group.
• “
♦
” appears.
e
Rotate
[DIAL]
to select the desired channel.
D
D
Clearing the stored frequencies:
q
Select the auto memory write channel group.
w
While pushing and holding
[FUNC]
, push and hold
[V/M] (
SKIP
•
S
.
MW
)
for 1 sec. to clear the all channels con-
tents.
• 1 short and 1 long beeps sound.
NOTE:
The auto memory write channel contents CANNOT
be cleared as an independent channel. Thus it is a good
idea to copy the contents into a memory channel.
ATT
DTCS
T SQL
W
FM
AM -DUP
LOW
VOL PRIO P SKIP MR
5
1
9
Appears
SCAN
S.MW
SET
ATT
DTCS
T SQL
W
FM
AM -DUP
LOW
VOL PRIO
P SKIP
MR
5
1
9
SCAN
[DIAL]
“ ” indicator blinks