![background image](http://html.mh-extra.com/html/icom/ic-e7/ic-e7_instruction-manual_612426053.webp)
40
7
SCAN OPERATION
7
t
Push
[CALL] (
MODE
•
SCAN
)
several times; or while pushing
and holding
[CALL] (
MODE
•
SCAN
)
, rotate
[DIAL]
to select
“S.MW.”
y
Push and hold
[V/M] (
SKIP
•
S
.
MW
)
for 1 sec. to set the skip
condition.
• “SKIP” or “PSKIP” indicator appears, according to the skip se-
lection in step
r
.
✔
CONVENIENT!
The skip setting can also be easily set with the following op-
eration.
q
Select the desired memory channel to be set as a skip
channel/frequency.
w
While pushing and holding
[FUNC]
, push
[V/M]
(
SKIP
•
S
.
MW
)
momentarily to select the skip condition from
“SKIP,” “PSKIP” and “OFF (no indication).”
✔
CONVENIENT!
During VFO scanning, such as programmed scan, the skip
setting can be programmed into the highest blank memory
channel which is automatically selected with the following op-
eration.
q
Start the VFO scan.
➥
Select
VFO mode
with
[V/M] (
SKIP
•
S
.
MW
)
.
• Select the desired frequency band with
[BAND] (
TS
•
LOCK
)
, if
desired.
➥
Push and hold
[CALL] (
MODE
•
SCAN
)
for 1 sec. to enter
scan type selection condition.
➥
Rotate
[DIAL]
to select the desired scanning type.
• “ALL” for full scan; “BAND” for band scan, “PROGxx” for pro-
grammed scan (xx= 0 to 24; programmed scan edges num-
bers only displayed)
➥
Push
[CALL] (
MODE
•
SCAN
)
again to start the scan.
• Scan pauses when a signal is received.
• Rotate
[DIAL]
to change the scanning direction, or resumes
manually.
w
When scan pauses and you want to set the paused fre-
quency as a skip frequency.
➥
Push and hold
[FUNC]
then push
[V/M] (
SKIP
•
S
.
MW
)
for
1 sec. to store the paused frequency into the highest
blank memory channel.
• While pushing and holding
[FUNC
], scan pauses; and after
writing the frequency, scan resumes.
ATT
DTCS
T SQL
W
FM
AM -DUP
LOW
VOL PRIO P
SKIP
MR
5
1
9
ATT
DTCS
T SQL
W
FM
AM -DUP
LOW
VOL PRIO
PSKIP
MR
5
1
9
• Skip channel setting
• Program skip setting
“SKIP” appears
“PSKIP” appears