NIIGATA SEIKI CO., LTD
NIIGATA SEIKI CO., LTD
NIIGATA SEIKI CO., LTD
NIIGATA SEIKI CO., LTD
LEVELNIC
LEVELNIC
LEVELNIC
LEVELNIC
Transmitter
Transmitter
Transmitter
Transmitter・
・
・
・Display Set DL
Display Set DL
Display Set DL
Display Set DL-
-
-
-D5
D5
D5
D5
Instruction Manual
Instruction Manual
Instruction Manual
Instruction Manual
Thank you for purchasing the DL-5 LEVELNIC Transmitter/Display Set.（Transmitter：DL-D5-TX、Display：DL-D5-DISP）
Please read this instruction manual thoroughly before use to insure proper operation and long service.
■ OVERVIEW
OVERVIEW
OVERVIEW
OVERVIEW
Transmitter and Display units for LEVELNIC DL-S3.
One transmitter can be connected to two LEVELNIC DL-S3, showing measurements from both on the Display.
Display includes independent 0-Cal, and 1/2-Cal controls for each connected DL-S3.
Can also be used with a single DL-S3 connected to the transmitter.
■ FEATURES
FEATURES
FEATURES
FEATURES
・Single compact display can be used to control two DL-S3 for X, Y measurements. Ideal for equipment installation and setup.
・Use it with a single DL-S3 to make work quicker and for measurements in situations where it is difficult to read the DL-S3 display.
・No set-up required. The transmitter and Display are shipped as a pre-configured pair and ready for immediate use.
・Key ring provided for attaching a lanyard.
・Silicone protective cover included.
■ COMPONENT NAMES
COMPONENT NAMES
COMPONENT NAMES
COMPONENT NAMES
Transmitter
Transmitter
Transmitter
Transmitter （
（
（
（ DL
DL
DL
DL -
-
-
- D5
D5
D5
D5 -
-
-
- TX
TX
TX
TX）
）
）
）
① Signal input jack (A channel)
Connect with the signal output jack of DL - S3 using the supplied cable.
② Signal LED (A channel)
Blinks when signal is received from DL-S3.
③ Signal input jack (B channel)
④ Signal LED (B channel)
⑤ Power ON button
Press and hold (approx. 2 seconds) to turn power ON.
⑥ Power OFF button
Press and hold (approx. 2 seconds) to turn power OFF.
When no signal is received from either A or B channels after about
5 minutes, power will automatically aromatically turn OFF.
⑦ WIRELESS LED
Shows the status of communication link to the Display Unit.
Blinks when communicating with the Display.
⑧ Battery level indicator.
Shows status of battery.
Both LED ON：Battery level is good.
One LED ON：Battery level is low.
Please replace battery as soon as possible.
Both LEDs OFF：Please replace battery before any further use.
【Battery compartment】
2x AA-type Cells
①
Key ring
③
②
④
⑤
⑦
⑥
⑧
Battery Cover
