![background image](http://html.mh-extra.com/html/icom/ic-91a/ic-91a_instruction-manual_612374058.webp)
52
7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
■
Message operation
D
D
TX message programming
TX messages are available for up to 5 channels and each
channel can be programmed with a message of up to 20
characters. Available characters are
0
to
9
,
A
to
Z
(capital let-
ters)
,
a
to
z
(lower case letters)
, some symbols and space.
q
Enter “TX MESSAGE” in message/position set mode.
• TX MESSAGE screen is displayed.
w
Rotate
[DIAL]
†
to select the desired transmit message
channel.
• Ch01 to Ch05 and OFF are available.
• Previously message is displayed if programmed.
e
Push
[
≈
≈
](6)
to select the message edit condition.
• The 1st digit of the message blinks.
r
Rotate
[DIAL]
†
to select the desired character or symbol.
• Push
[A/a](3)
to change the character group from “AB” (alpha-
betical characters; capital letters), “ab” (alphabetical characters;
lower case letters), “12” (numbers) and “ !” ” (symbols) in se-
quence.
• If an un-necessary character is entered, push
[
≈
≈
](6)
or
[
Ω
Ω
](4)
to
select the character, then push
[CLR](1)
to erase the selected
character, or push and hold
[CLR](1)
for 1 sec. to erase all char-
acters following the cursor.
t
Push
[
≈
≈
](6)
to select 2nd digit, then rotate
[DIAL]
†
to select
the desired character or code.
• Push
[
≈
≈
](6)
to move the cursor right; push
[
Ω
Ω
](4)
to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
y
Repeat the steps
r
and
t
to enter the desired message.
• Up to 20-character messages can be set.
u
Push
[
ï
](5)
to store the message.
i
Push
[MENU/LOCK]
to return to frequency indication.
Ch01
Ch01
!
'
'
Hello!
Hello!
†
:SET
:SET
:SEL
:SEL
:CUR
:CUR
CLR:CLR
CLR:CLR
A/a:CHAR
A/a:CHAR
TX MESSAGE
TX MESSAGE
r
Ch01
Ch01
†
:SET
:SET
:SEL
:SEL
:BACK
:BACK
CLR:CLR
CLR:CLR
TX MESSAGE
TX MESSAGE
:EDIT
:EDIT
r
MENU screen
➪
MESSAGE/POSITION
➪
TX MESSAGE
(Push
[MENU/LOCK]
) (Rotate
[DIAL]
†
, then push
[
ï
](5)
†
.)