![background image](http://html.mh-extra.com/html/icom/ic-91a/ic-91a_instruction-manual_612374047.webp)
41
7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
7
■
Digital repeater operation
Repeater call signs must be programmed for repeater opera-
tion in both digital voice and low-speed data communications.
D
D
Repeater call sign programming
q
Select B band as the main band.
(p. 14)
w
Enter “R1” or “R2” in call sign set mode.
• RPT1 or RPT2 CALL SIGN screen is displayed.
e
Rotate
[DIAL]
†
to select the desired call sign memory,
“R01” to “R60.”
r
Push
[
≈
≈
](6)
to enter call sign programming mode.
• The 1st digit blinks.
t
Rotate
[DIAL]
†
to select the desired character or code.
• Push
[A/a](3)
to change the character group from “AB” (alpha-
betical characters; capital letters), “12” (numbers) and “/” (sym-
bols) in sequence.
• Set “/” at the 1st digit then set the desired area repeater’s call
sign (in a different zone) for CQ call (“/” stands for “CQCQCQ”) in
a different zone operation. (p. 44)
y
Push
[
≈
≈
](6)
to select 2nd digit, then rotate
[DIAL]
†
to se-
lect the desired character or code.
• Push
[
≈
≈
](6)
to move the cursor right; push
[
Ω
Ω
](4)
to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
u
Repeat the steps
t
and
y
to enter the desired repeater
call sign.
• Up to an 8-digit of call sign can be set.
• Push
[7]
when setting with the gateway connection if the se-
lected repeater has gateway capability. (The gateway connec-
tion can be set in RPT1 only when “NOT USE
✱
” is set to RPT2.)
• If an un-necessary character is entered, push
[
≈
≈
](6)
or
[
Ω
Ω
](4)
to
select the character, then push
[CLR](1)
to erase the selected
character, or push and hold
[CLR](1)
for 1 sec. to all characters
following the cursor.
i
Push
[
ï
](5)
to store the programmed call sign and returns
to RPT1 or RPT2 CALL SIGN screen.
o
Push
[MENU/LOCK]
to return to frequency indication.
R01
R01
RPT1AA G
RPT1AA G
:SET
:BACK
:SEL
:EDIT
CLR:CLR
RPT1 CALL SIGN
r
MENU screen
➪
CALL SIGN
➪
R1
/
R2
(Push
[MENU/LOCK]
) (Rotate
[DIAL]
†
, then push
[
ï
](5)
†
.)
†
[DIAL]
↔
[
∫
∫
](2)
/
[
√
√
](8)
[
ï
](5)
↔
[
≈
≈
](6)
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19