![background image](http://html.mh-extra.com/html/icom/ic-91a/ic-91a_instruction-manual_612374083.webp)
77
9
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Memory scan
IMPORTANT!:
To perform memory scan, 2 or more mem-
ory channels MUST be programmed, otherwise the scan
will not start.
q
Push
[MR]
to select memory mode.
w
Set the squelch level.
e
While pushing and holding
[SCAN](2)
, rotate
[DIAL]
to se-
lect the desired scanning type.
• “ALL” for full memory scan; “BAND” for band memory scan,
“MODE” for mode scan, “DUP” (appears only when duplex oper-
ation is set) for duplex scan.
r
Release
[SCAN](2)
to start the selected scan.
• Scan pauses when a signal is received.
• Rotate
[DIAL]
to change the scanning direction, or resumes
manually.
t
To stop the scan, push
[VFO]
.
Band memory scan function:
Repeatedly scans all
memory channels programmed with any frequencies of the
band programmed in the memory channel selected for
scanning.
Mode scan function:
Repeatedly scans all memory chan-
nels in which the same operating mode as the selected
memory channel has been programmed.
Duplex scan function:
Repeatedly scans two frequencies
(transmission/reception) during duplex scan operation.
FM
A
µ
012
148 800
• During memory scan
FM
FM
A
146 010
µ
088
088
SCAN:ALL
FM
A
148 800
µ
088
088
SCAN:BAND
FM
A
148 800
µ
088
088
SCAN:MODE
P SKIP
SKIP
P SKIP
SKIP
P SKIP
SKIP
• All memory scan selection
• Mode scan selection
• Band memory scan selection
[DIAL]