![background image](http://html.mh-extra.com/html/icom/ic-91a/ic-91a_instruction-manual_612374084.webp)
78
9
SCAN OPERATION
■
Memory bank scan
IMPORTANT!:
To perform memory bank scan, 2 or more
bank channels MUST be programmed, otherwise the scan
will not start.
q
Push
[S.MW](MR)
several times to select memory bank
mode.
w
Set the squelch level.
e
While pushing and holding
[SCAN](2)
, rotate
[DIAL]
to se-
lect the desired scanning type.
• “ALL” for all bank scan; “BANK-LINK” for bank link scan or
“BANK-x” for bank scan (x= A to Z; programmed bank groups
are only displayed.), “DUP” (appears only when duplex opera-
tion is set) for duplex scan.
r
Release
[SCAN](2)
to start the selected scan.
• Scan pauses when a signal is received.
• Rotate
[DIAL]
to change the scanning direction, or resumes
manually.
t
To stop the scan, push
[VFO]
.
The bank-link setting can be changed in scan set mode.
See page 97 for details.
Duplex scan function:
Repeatedly scans two frequencies
(transmission/reception) during duplex scan operation.
FM
A
µ
888
148 800
• During all bank/bank link scan • During bank scan
FM
A
µ
A88
148 800
FM
FM
A
146 010
µ
A01
A01
SCAN:ALL
FM
A
148 800
µ
A01
A01
SCAN:BANK-LINK
FM
A
148 800
µ
A01
A01
SCAN:BANK-A
P SKIP
SKIP
P SKIP
SKIP
P SKIP
SKIP
• All bank scan selection
• Bank scan selection
• Bank link scan selection
Selectable between “A” to “Z”
if programmed.
[DIAL]