![background image](http://html.mh-extra.com/html/icom/ic-7400/ic-7400_instruction-manual_612264082.webp)
69
8
SCANS
2001 NEW
2001 NEW
■
Voice squelch control function
This function is useful when you don’t want unmodu-
lated signals pausing or cancelling a scan. When the
voice squelch control function is activated, the receiver
checks received signals for voice components.
If a receiver signal includes voice components, and the
tone of the voice components changes within 1 sec.,
scan pauses (or stops). If the received signal includes
no voice components or the tone of the voice compo-
nents does not change within 1 sec., scan resumes.
➥
While
M2
is selected with [MENU], push [F5
VSC
]
to switch the VSC (Voice Squelch Control) function
ON and OFF.
• “VSC” appears when the function is activated.
• The VSC function activates for any scan.
• The VSC function resumes the scan on unmodu-
lated signals, regardless of whether the scan re-
sume condition is set to ON or OFF.
■
Scan set mode
When the squelch is open, scan continues until it is
stopped manually— it does not pause on detected sig-
nals. When squelch is closed, scan stops when de-
tecting a signal, then resumes according to the scan
resume condition. Scan speed and the scan resume
condition can be set using the scan set mode.
q
Push[MENU] to select
M2
.
w
Push [F1
SCN
] to select scan menu.
e
Push [F5
SET
] to select scan set mode.
r
Push [F1
≤
] or [F2
≥
] to select
SCAN Speed
item.
t
Rotate the tuning dial to select scan speed from
high and low.
• “
HIGH
” : scan is faster
• “
LOW
”
: scan is slower
y
Push [F2
≥
] to select
SCAN Resume
item.
u
Rotate the tuning dial to select scan resume func-
tion from ON and OFF.
• “
ON
”
: when detecting a signal, scan pauses for
10 sec., then resumes. When a signal disap-
pears, scan resumes 2 sec. later.
• “
OFF
”
: when detecting a signal, cancels scanning.
i
Push [MENU] to return to scan menu.
F 1
F 2
F 3
F 4
F 5
F 1
F 2
F 3
F 4
F 5
F 1
F 2
F 3
F 4
F 5
F 1
F 2
F 3
F 4
F 5
S C N M E M S W R T C N V S C
P R O
∂
F F I N S P N S E T
∂
F : ± 1 O k
Push [F1]
Push [F5]
S C A N S p e e d
H I G H
1
Push [F1] or [F2]
S C A N R e s u m e
O N
2
F 1
F 2
F 3
F 4
F 5
S C N M E M S W R T C N V S C
Push [F5] to turn the VSC function ON and OFF.
VSC indicator
IC-7400.qxd 02.4.2 11:35 Page 69