64
7
MEMORY OPERATION
2001 NEW
■
Frequency transferring
The contents of a memory channel (frequency, oper-
ating mode, etc.) can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
D
D
Transferring in VFO mode
This is useful for transferring programmed contents to
VFO.
q
Select VFO mode with [V/M].
w
Select the memory channel to be transferred with
[M-CH].
• “BLANK” appears if the selected memory channel is a
blank channel. In this case transferring is impossible.
e
Push [V/M] for 1 sec. to transfer the frequency and
operating mode.
• 3 beeps are emitted.
D
D
Transferring in memory mode
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
•
Displayed
frequency and mode are transferred.
•
Programmed
frequency and mode in the memory
channel are not transferred, and they remain in the
memory channel.
q
Select the memory channel to be transferred with
[M-CH] in memory mode.
• And, set the frequency or operating mode if required.
w
Push [V/M] for 1 sec. to transfer the frequency and
operating mode.
• 3 beeps are emitted when the transferring is successful.
• Displayed frequency and operating mode are transferred
to the VFO.
e
To return to VFO mode, push [V/M] momentarily.
[
V/M
]
[M-CH]
TRANSFERRING EXAMPLE IN VFO MODE
Operating frequency : 21.320 MHz/USB (VFO)
Contents of M-ch 16 : 14.018 MHz/CW
Push [V/M] for 1 sec.
TRANSFERRING EXAMPLE IN MEMORY MODE
Operating frequency : 14.020 MHz/CW (M-ch 16)
Contents of M-ch 16 : 14.018 MHz/CW
Set the frequency
Push [V/M] for 1 sec.
then push [V/M]
IC-7400.qxd 02.4.2 11:35 Page 64
