71
8
SCANS
2001 NEW
2001 NEW
■
Memory scan operation (Memory mode)
Memory scan searches through memory channel 1 to
99 for signals. Blank (unprogrammed) memory chan-
nels are skipped.
q
Push [V/M] to select memory mode, if necessary.
w
Push [MENU] to select
M2
.
e
Push [F1
SCN
] to select the scan menu.
• See p. 69 for scan condition.
• If the [RF/SQL] control function is set as “AUTO,” the
squelch is always open in SSB, CW and RTTY modes.
r
Push [F1
MEM
] to start the memory scan.
• The MHz and kHz decimal points blink while scanning.
• At least 2 memory channels must be programmed for
memory scan to proceed.
t
To cancel the scan, push [F1
MEM
].
• Rotating the tuning dial during scan also cancels scan
operation.
■
Select memory scan
Select memory scan searches through memory chan-
nels set as “select,” for signals. See below for setting
and deleting select memory channels.
q
Follow the steps
q
to
r
above to start memory
scan.
w
During memory scan, push [F3
SEL
] to switch be-
tween memory scan and select memory scan.
• At least 2 memory channels must be set as the select
channel.
e
Push [F1
MEM
] to cancel the scan.
• Rotating the tuning dial during scan also cancels scan
operation.
D
D
Setting/Cancelling select memory channels
All memory channels, except scan edges (P1 and P2),
can be set as a select memory channels.
➥
While the scan menu is selected, push [F3
SEL
] to
set/cancel the displayed memory channel as a se-
lect channel; or while memory name screen is indi-
cated, push [F5
SEL
] to set/cancel the displayed
memory channel as a select memory channel.
• “SEL” appears when the channel is set as a select mem-
ory channel.
• “SEL” disappears when cancelled.
• Push [F3
SEL
]/[F5
SEL
] for 1 sec to cancel all select
memory settings.
Tuning dial
[MENU]
[
V/M
]
F 1
F 2
F 3
F 4
F 5
M E M
∂
F S E L S P N S E T
M E M O S C A N
Push [F1] to start/cancel the scanning.
F 1
F 2
F 3
F 4
F 5
F 1
F 2
F 3
F 4
F 5
M E M
∂
F S E L S P N S E T
M E M O S C A N
M E M
∂
F S E L S P N S E T
S E L - M E M O S C A N
Push [F3] to switch
between memory scan
and select memory
scan.
F 1
F 2
F 3
F 4
F 5
F 1
F 2
F 3
F 4
F 5
∂
F : ± 1 O k
M E M
∂
F S E L S P N S E T
Push [F3] to set/cancel as a select channel.
Select memory inidcator
Push [F3] to set/cancel as a select channel.
E D T ( ) S E L
1 4 . 1 9 5 O O U S B
• Scan menu
• Memory name screen
IC-7400.qxd 02.4.2 11:35 Page 71
