67
7
MEMORY OPERATION
2001 NEW
■
Memo pads
The transceiver has a memo pad function to store fre-
quency and operating mode for easy write and recall.
The memo pads are separate from memory channels.
The default number of memo pads is 5, however, this
can be increased to 10 in set mode if desired. (p. 84)
D
D
Writing frequencies and operating
modes into memo pads
➥
Push [MP-W] to store the displayed frequency and
operating mode into a memo pad.
• Each push of [MP-W] stores a frequency and mode into
the next available memo pad; when you write a 6th (or
11th) frequency and operating mode, the oldest written
frequency and operating mode are automatically erased
to make room for the new settings.
D
D
Recalling a memo pad
➥
Push [MP-R] to recall a memo pad.
• Each push of [MP-R] recalls a memo pad, starting from
the most recently written.
NOTE:
Each memo pad must have its own unique
combination of frequency and operating mode;
memo pads having identical settings cannot be writ-
ten.
A G C D U P C M P T B W S C P
MP-W
Erased
In this example, pushing [MP-W] enters 21.28000 MHz
USB into the top memo pad and erases the oldest
memo pad (21.34724 MHz LSB).
• Displayed frequency and mode
• Stored in next available memo pad
A G C D U P C M P T B W S C P
• VFO or memory mode
• Memo pads
MP-R
MP-R
IC-7400.qxd 02.4.2 11:35 Page 67
