![background image](http://html2.mh-extra.com/html/icom/ic-705/ic-705_basic-manual_4085731017.webp)
2-2
BASIC MANUAL
PANEL DESCRIPTION
2
2
14
TRANSMIT FREQUENCY CHECK KEY
z
In the Split or Duplex mode, holding the key
down enables you to monitor the transmit
frequency.
z
In the Simplex mode, holding the key down
temporally opens the squelch and cancels
the noise reduction function.
L
In the DV mode, holding the key down enables
you to monitor signals in the FM or DV mode,
depending on the Digital Monitor setting.
15
MEMO PAD KEY
z
Push to sequentially call up the contents in
the Memo Pads.
z
Hold down for 1 second to save the
displayed contents into the Memo Pad.
16
SCAN KEY
z
Push to display the SCAN SELECT screen.
z
Hold down for 1 second to start the
previously selected scan.
17
AUTO TUNE/RX CALL SIGN CAPTURE KEY
z
In the CW mode, pushing the key
automatically tunes the operating frequency
to a close-by CW signal. (p. 4-13)
z
In the DV mode, push to display the RX
History list, or hold down for 1 second to
capture the latest received call sign (station
or repeater) as a temporary call destination.
18
SPEECH/LOCK KEY
z
Push to announce the operating frequency
or mode.
z
Hold down for 1 second to electronically
lock
. (p. 3-8)
19
AMBIENT LIGHT SENSOR
Used to automatically adjust the display’s
backlight brightness.
L
DO NOT
cover the sensor.
20
TX/RX INDICATOR
Lights red while transmitting, and lights green
while receiving.
21
CHARGING INDICATOR (p. 1-2)
Lights orange while charging when the
transceiver’s display is OFF.
22
MAIN DIAL
Rotate to change the operating frequency.
Front panel
1/4-20UNC
4-M4
38 mm
(1.5 inch)
30 mm (1.2 inch)
You can attach a third party mounting base
using screw holes* on the bottom panel.
* AMPS hole pattern
Bottom panel
Summary of Contents for IC-705
Page 95: ...VI BASIC MANUAL MEMO...