![background image](http://html2.mh-extra.com/html/icom/ic-705/ic-705_basic-manual_4085731018.webp)
2-3
BASIC MANUAL
2
PANEL DESCRIPTION
Side panels
1
SEND/ALC JACK [SEND/ALC] (p. 13-2)
Connect to control transmit with non-Icom
external units or the ALC output jack of a non-
Icom linear amplifier.
2
TUNER JACK [TUNER]
Accepts the control cable from an external
antenna tuner with a 3.5 mm (1/8 inch) stereo
plug.
3
DC POWER JACK [DC 13.8 V] (p. 13-1)
Accepts 13.8 V DC through the supplied DC
power cable.
4
Connects to a straight key, paddle, an external
electronic keyer, or an external keypad with a
3.5 mm (1/8 inch) stereo plug.
5
microUSB PORT (TYPE-B) [microUSB]
Connects to an external power source, a PC,
or other USB device.
6
ANTENNA CONNECTOR [ANT] (p. 13-3)
Connect to a 50 Ω Type BNC coax connector.
7
SPEAKER-MICROPHONE CONNECTOR
[SP/MIC] (p. 13-3)
Connect a speaker microphone or headset.
(SP: 3.5 mm (1/8 inch), MIC: 2.5 mm)
L
Confirm that the transceiver is OFF before
connecting or disconnecting optional equipment.
8
GROUND TERMINAL [GND] (p. 13-2)
Connect to ground to prevent electrical
shocks, TVI, BCI, and other problems.
9
microSD CARD SLOT [microSD CARD]
Insert a microSD card (user supplied).
6
8
7
9
1
2
3
4
Right side panel
Left side panel
1
[PTT] SWITCH
Hold down to transmit, release to receive.
NOTE:
To maximize the readability of your
signal, hold the microphone 5 to 10 cm (2 to
4 inches) from your mouth, and then speak
at your normal voice level.
2
[A] KEY
Push to activate the assigned function of the
[A] key. (Default: Home CH)
[B] KEY
Push to activate the assigned function of the
[B] key. (Default: VFO/MEMO)
3
[▲]/[▼] (UP/DOWN) KEYS
z
Push to change the operating frequency or
Memory channel.
z
Hold down to continuously change the
frequency or Memory channel.
TIP:
You can change the assigned function of the
[▲], [▼], [A], and [B] keys in the following item.
» SET > Function >
Remote MIC Key
Speaker Microphone
1
2
3
Mic element
5
Summary of Contents for IC-705
Page 95: ...VI BASIC MANUAL MEMO...