20
D-STAR OPERATION
New2001
D-STAR GUIDE
■
Calling an individual station
You can make a call to an individual station when the station
call sign is selected in “TO” (Destination).
When you call an individual station call sign through a
gateway, your call is automatically sent to the last repeater
that the station accessed. So, even if you don’t know where
the station is, you can make a call using call sign routing.
Step 1: Set “FROM” (Access repeater)
1. Hold down [DR] for 1 second to display the DR screen.
2. Select “FROM,” then push [
ï
].
•Displays the FROM SELECT screen.
L
On the DR screen, pushing [DR] toggles between “FROM”
and “TO.”
3. Rotate [DIAL] to select “Repeater List,” then push [
ï
].
•Displays the REPEATER GROUP screen.
4. Select the repeater group where your access repeater
is listed, then push [
ï
].
5. Select your access repeater, then push [
ï
].
• Returns to the DR screen, and the selected repeater name is
displayed in “FROM.”
(Example: Your access repeater is set to “Hirano.”)
Step 2: Set “TO” (Destination)
1. Push [DR] to select “TO,” then push [
ï
].
•Displays the TO SELECT screen.
2. Rotate [DIAL] to select “Your Call Sign,” then push [
ï
].
•Displays the YOUR CALL SIGN screen.
3. Select your destination station, then push [
ï
].
• Returns to the DR screen, and the selected station name is
displayed in “TO.”
(Example: The destination station is set to “Station1.”)
Step 3: Hold down [PTT] to transmit
•Displays
while transmitting.
