![background image](http://html2.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_manual_3513747016.webp)
15
D-STAR OPERATION
New2001
New2001
D-STAR GUIDE
Step 3: Check whether you can access the repeater
Hold down [PTT] for approximately 1 second to access the
repeater.
L
If you get a reply call, or “UR?” is displayed on the LCD within 3
seconds, your signal reached your access repeater and your call
was successfully sent from your destination repeater.
■
Accessing repeaters (Continued)
TIP:
See page 31 for status indications after a reply is
received.
Successfully sent!
■
Using the RX history
When a DV call is received, the call signs of the caller, the
called station and the called station’s access repeater are
stored in the RX history file. Up to 50 calls can be stored.
Even if you turn OFF the transceiver, the RX history is
retained.
This section describes how to display the RX history screen
and how to save the call sign to memory.
The S-meter
and the caller’s
call sign are
displayed.
When receiving a call from “JM1ZLK.”
Step 1: To display a received call sign
1. Push [QUICK].
2. Rotate [DIAL] to select “RX History,” then push [
ï
].
•Displays the RX HISTORY screen.
L
You can display other RX history by rotating [DIAL].
RX HISTORY screen (RX01)
Record
number
RX message
Received date and time
Caller station
L
A note may be
displayed after “/”.
Called station