![background image](http://html2.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_manual_3513747008.webp)
7
INTRODUCTION
New2001
New2001
D-STAR GUIDE
You can easily use D-STAR repeaters with the DR (D-STAR
Repeater) function. With this function, you can select the
preset repeater or frequency in “FROM” (access repeater),
and Your call sign in “TO” (destination) on the DR screen, as
shown below.
L
To display the DR screen, hold down [DR] for 1 second.
L
On the DR screen, pushing [DR] toggles between
“FROM” and “TO.”
IMPORTANT!
Before starting D-STAR, the following steps are needed.
STEP 1
Entering your call sign (MY) into the transceiver.
STEP 2
Registering your call sign (MY) to a gateway repeater.
STEP 3
Entering your D-STAR equipment into your registration form.
You have completed the steps!! See pages 9 ~ 11 for details.
■
About the DR (D-STAR Repeater) function
Destination
(Repeater/Station)
Access repeater
The DR screen
NOTE:
If the repeater set in “FROM” (Access Repeater)
has no Gateway, you cannot make a Gateway call.