9
1. Open the cover of the backside of the charging station, and install the adapter with connected power plug as in the figure.
2. Completely connect the charging jack of the adapter to the jack inside the charging station.
1. Turn on the power switch on the side of the product.
2. Correctly match the charging pin on the bottom of the main body to the socket of the charging station,
and start the charging.
>> The battery status in the display window blinks and charging starts.
If battery is completely discharged, “Lo” is displayed in the display window.
3. Green light flashes during the charging, and when the charging is completed,
battery status in the display window is kept on with green light.
[Auto-charge during use]
※
When the battery is low during an operation, this product moves to the charging station and performs auto charging.
After the charging is completed, it finishes cleaning the remaining space, and returns to the charging station.
※
When the battery is low, this product is set to return to the starting place of the cleaning.
So if it started from a place other than the charging station, it returns to the place near
the starting place of the cleaning.
Battery is discharged at the time of the purchase of the product,
so it shall be charged manually in the beginning.
1
2
4
1
2
3
3
●
Installing the r
obot c
leaner
Check list before cleaning
Install base
(charging)
station
Charging
