7
Operating principles of robot cleaner
Principles of Vacuum Cleaning Robot
This product recognizes the ceiling and obstacles with camera and various sensors,
and cleans by making a virtual map in CPU installed in the main body.
The robot cleaner decides the finished area and area to clean by itself. It draws the most effective map
for cleaning and operates according to the map.
(But, it is excluded in random mode and maximum mode.)
With more than 20 detection sensors, it can avoid wall or objects (chair, vase, etc).
It climbs a door sill of up to 20mm, and it does not fall from the stairs with floor sensor.
Suction of robot cleaner
This product has one main brush, two side-brushes and vacuum suction duct.
The dust on the floor is gathered by the rotating side brush, and is swept into the dust bin by the rotating main brush.
For effective cleaning
Please follow the instructions below for high cleaning efficiency.
- Empty the dust bin after using the robot cleaner.
- Separate the place not to be cleaned using entrance prevention tape or by closing the door.
(Refer to P.10 How to install entrance prevention tape)
- Remove all the non-fixed objects such as toys, magazines or shoes before cleaning.
- Do not lift up or move the robot cleaner manually while operating.
(The memorized cleaning path may be deleted, or there may be a space where cleaning cannot be done.)
- Make sure to charge with manual charging for at least 1 hour before using the vacuum cleaning robot
for the first time. (Refer to P.9 How to charge manually)
●
R
e
fe
re
n
c
e
