13
1. While pressing the dust bin out button of the main body
as in the figure and carefully separate the dust bin toward the back.
2. Hold the blade of the dust bin as in the figure, and dust off the litter.
3. Clean the inner part of the dust bin using cleaning brush.
4. After closing the blade, hold the dust bin as in the figure, and separate sterilization filter cover.
5. Dust the filter using cleaning brush.
※
Dust bin and filter can be washed with water. But, completely dry them before assembling
and using them again.
Mending Sensor
●
P
ro
du
ct
c
on
tro
l &
m
ain
te
na
nc
e
Emptying Dust Bin and Mending Sterilization Filter
Mending Side Brush
1. Separate the side-brush with both hands.
2. Clean dust and foreign substance using the cleaning brush.
1. Wipe the sensors on the front bumper of the robot cleaner
using cotton buds.
2. Wipe the sensors on the bottom of the robot cleaner
using cotton buds.
※
if there is dirt obstructing the IR sensors,
the robot cannot work correctly.
