Error codes are also listed in the owner’s manual.
IM-Series
Service Tips
38
•
Operating Order
1.
In standby mode the Flexible Numeric Display (FND) is off.
2.
When you press the “MODE” button, the FND will turn on and either show the last error code ( if there is one) OR the first se
tting.
3.
While the FND is on, press the “UP” or “DOWN” button to move through the available settings.
4.
Pressing the “MODE” button again will display the default value for the current setting.
5.
Use the “UP” or “DOWN” buttons to change the default value, followed by the “MODE” button to save the new value.
6.
If there are two values for one setting, press the “MODE” button to move between the two value settings.
7.
The FND will automatically turn off when it has no input for 30 seconds.
•
Forced Harvest
1.
Press the “UP” + “DOWN” simultaneously for 3 seconds to force the harvest cycle on the ice machine.
•
Forced Drain
1.
Press the “DOWN” + “MODE” buttons simultaneously for 3 seconds to force a 30 second drain function.
•
Reset to Default Values
1.
Pressing the “UP” + “DOWN” + “MODE” buttons simultaneously for 3 seconds will reset the FND values to their default settings.
2.
Please refer to the user manual when setting the “Drain Time After Harvest” value.
Summary of Contents for IM-1100
