Does the machine have water? Look at the front cover and observe if the YELLOW
“no water” light is on steady (not flashing).
Check for water.
If the “no water” light is on, check to see if the water supply valve is
open, that water trough inside the machine is NOT out of place, and
that the water trough is empty (no water).
The handle on the water
valve will be parallel
with the water line
when it’s open.
Water trough is out
of alignment
The handle on the water
valve will point away
from the water line
when it’s closed.
If the water supply is open, the water trough is securely in place, and there is no water in the
water trough, ensure that the water level sensor is not out of place.
Pre-Start Up Tips
17
Summary of Contents for IM-1100
