icetro IM-1100, Installation & Service Manual

Page: 33 / 55

Switches will be upside-down when facing the PCB
IM-Series
PCB Dip Switch Settings
2 Descriptions 1 Descriptions
ON Use drain function ON Drain after harvest
OFF
Do not use drain
function (All the drain
time : OFF)
OFF Drain after ice making
Initial Dump: Basic Process
1) It only works at the beginning of the first
“ice making" cycle.
2) Check the water level sensor and operate the dump valve and water pump in case of high-water level.
3) When the low level is detected, the dump valve and the water pump are stopped.
4) The maximum drain time is 30 seconds.
5) After the initial drainage is completed, the water supply enters operation.
Model
Initial drain
time
Drain after
harvest
Drain after ice
making
Water supply
delay time
Pump stop
time during ice
making
Harvest Assist
Temperature
30” Series
20s 20s(0680-10s) N/A (20s) 15s 15s N/A (0
℃
)
22” Series
20s 10s N/A (10s) 5s 15s N/A (0
℃
)
1100 Series 20s 10s N/A (10s) 30s 15s N/A (0
℃
)
3 Descriptions
ON Air cooled
OFF Water cooled
4 5 Descriptions
ON ON
IM-0350/0460/0550-
22 Series(22”)
ON OFF IM-1100 Series
OFF ON IM-1100 Remote
OFF OFF
IM-0350/0460
/0550/0680
Series(30”)
IM-0460/0680
Water Cooled
IM-0350/0460
0550/0680
Air Cooled
IM-0350/0460
0550- 22 (22”)
Water Cooled
IM-0350/0460
0550- 22 (22”)
Air Cooled
IM-1100
Water Cooled
IM-1100
Air Cooled
IM-1100
Remote
Do not use drain function
(All the drain time : OFF)
Turning dip switches down will put them in the “ON” position!
33