icetro IM-0770-AF User Manual Download Page 14

Page: 14 / 32

We Think of Customer Satisfactio

How to install the storage bin

Installing the ice maker and connecting storage bin

1. Unpack the ice storage bin and make sure that it will not be
moved after installation.

2. Connect the drain hose at the bottom outlet part and fully tighten
the joints at the connecting part in order to minimize leaks.

3. Adjust the 4 adjustment feet of the storage bin to level it.
(Adjustment must be less than 1˚ for all 4 feet)

1. Use the lifting device to put the ice maker on top
of the bin. Otherwise, at least 2 to 3 persons must
work together to put the ice maker on the bin.

2. As the first phase, put the ice maker on a loading platform.
(Height of loading platform: Minimum of 39.4"
is recommended)

Loading
platform

Product

(Head)

3. As the second phase, move the ice maker
from the platform to the top of the bin.

◆ Be sure to apply more power to the right part of the ice
maker since it is heavier due to the compressor therein.

Tighten the joints at the connecting part, face the outlet
of the hose upward, and pour some water into the bin
to check for leaks.

Summary of Contents for IM-0770-AF

































Search results

Summary of Contents for IM-0770-AF

Reviews:

Related manuals for IM-0770-AF

Brands by name

Popular brands

icetro IM-0770-AF, User Manual

Search results

Summary of Contents for IM-0770-AF

Reviews:

Related manuals for IM-0770-AF

Brands by name

Popular brands