20
We Think of Customer Satisfactio
n
1. Set the power switch on the front
to left('ICE') to start the product.
◆ Water is supplied for a moment while
the ice making operation is stabilized,
and ice making starts after the motor runs
for 60 seconds.
1. Set the power switch on the front to right
('DRAIN') to start draining.
◆ Draining is the operation for clearing the cylinder inside the ice maker or removing
any remaining water and ice from the product. Selecting "DRAIN" starts the draining
and running of the motor.
◆ The ice maker stops after 5 minutes.
(Setting the switch at 'OFF' stops the motor after additional 60 seconds of operation.)
◆ In order to run the product again, switch back to 'OFF' and select 'ICE' or 'DRAIN'
as needed.
※ Draining automatically starts every 12 hours while the ice maker is running.
During automatic draining, the water inlet, draining, and motor are operated
for 20 minutes by repeating starting and stopping.
Ice making
Water outlet(evaporator)
◆ The time may vary depending on the ambient temperature
and water temperature, but it will take about 5 minutes before
ice cubes are produced.
20~30 minutes later
5. Starting the product
Summary of Contents for IM-0770-AF
Page 31: ...31 MEMO ...
Page 32: ...3240365 01 Online Internet Service http www icetro com ...
