38
We Think of Customer Satisfactio
n
Step 1: After the ice falls off the evaporator, turn off the switch in the final stage of ice harvest cycle.
Or place the switch to OFF to stop automatically after making and harvest ice.
※ Caution: Do not remove ice from evaporator by force. It could damage evaporator.
Step 2: Remove all ice inside the bin. (To use ice later, keep it in an appropriate storage bin.)
※ Warning: Shut the power to the ice maker in the electric switch box before going further.
(Set the earth-leakage breaker to off or turn the ice maker’s switch to off.)
Step 3: Our ice makers generally come in two types. They have different disassembly methods and parts.
Please take cautions when disassembling parts.
① Cubic Type : If necessary, remove the top cover, and disassemble evaporator cover, water curtain
(piano-shape part-some products need to disassemble the bolts from the front side),
ice guide (the part designed to guide the falling ice into the bin), nozzle frame
(the part to which the water spraying nozzle is attached).
② Vertical Type : If necessary, remove the top cover and disassemble the water curtain(the cover
which prevents water splash in the front side - push to the right completely to remove
the trapping on the left to disassemble). You do not need to disassemble thickness
sensor and water supply pipe.
Step 4: Put all components in 1 liter (3 liters for cubic type) of cleaning agent-water mixture and clean
with soft nylon brush.
Remove spray bar (remove silicon cap on left/right), separate nozzle and inserts, and soak them
in the mixture for five minutes5. (Cubic Type)
If the lime has built up thickly, soak them in the mixture for 15 - 20 minutes.
Shake the parts from time to time and use warm water for better results. For Cubic Type,
use a toothbrush to clean between nozzles.
After cleaning, rinse all parts with clean water.
Step 5: While you are soaking all parts in the cleaning mixture, use a soft brush to scrub the inside
of the ice bin.
Scrub inner door, door rail, bin, and evaporator frame thoroughly and rinse with clean water.
For Cubic Type icemaker, clean the top pipe area of the evaporator, also.
Step 6: After cleaning, place the parts back and pour 3 liters (1 liter for clear type) of the remaining mixture
into the bin.
Step 7: Connect power to the ice maker. (The switch of the ice maker is OFF)
Step 8: To start automatic washing, place the switch to WASH.
Step 9: After cleaning, (Cubic Type takes approximately 21 minutes and Vertical Type, approximately
30 minutes), place the switch to OFF.
When the cleaning agent remains inside the water vessel, use the drain plug to remove cleaning solution.
For Cubic Type ice maker, place the drain plug again, pour 1 liter of water in the bin, place the switch
to WASH, and circulate water again. (WASH function). For Vertical Type ice maker with water
supply/drain valve automatically washes and fills it with water.
Summary of Contents for IM-0350-AC
Page 43: ...43 MEMO...
Page 44: ...3240422 04 Online Internet Service http www icetro com...
