33
[ Display of Flexible Numeric Display (FND) Module ]
※ Attention: FND module is an optional feature.
This is applied to only the models to which FND module is mounted.
"Increase" Button
"Decrease" Button
"Mode" Button
● Operating Order
1. In standby mode, FND is off.
2. When you press "MODE" button, FND will turn on and show the program version.
3. While FND is on, press "UP" or "DOWN" button to move to the previous or next item.
4. Move to each item and press "MODE" button to see the default value on FND.
5. Change setting with "UP" or "DOWN" button, and press "MODE" button to save
to move to upper item.
6. Press "MODE" button on simple display item to display the corresponding value
and press "MODE" button again to move to upper item.
7. It will turn off automatically when it has no input for 30 seconds.
● Forced Harvest
- Press "UP" + "DOWN" buttons simultaneous for 3 seconds to perform forced harvest.
※ Please avoid using this function unless repair service is needed.
● Forced Drain
- Press "DOWN" + "MODE" buttons simultaneous for 3 seconds to perform forced drain
(30 seconds).
● Setting Value Initialization
- Press “UP” + "DOWN" + "MODE" buttons simultaneous for 3 seconds and the FND
setting values will be initialized.
- However. please setting the value refer to the contents of "Specifications" for
"Drain time after harvest".
Summary of Contents for IM-0350-AC
Page 43: ...43 MEMO...
Page 44: ...3240422 04 Online Internet Service http www icetro com...
