IceCure Medical Ltd.
DSR3210000 rev. D
ProSense™
Confidential
User Manual
105
Return to first page
5.4.3
Disassembling the support device - Hose-Holder
If a Hose-Holder accessory is used as a support device, safely disengage the hose from
the Holder arm.
5.4.4
Disassembling the temperature sensor
If a temperature sensor was used, pull the gray part of the cable connector backwards to
release it, and then pull the cable connector away from the front panel, dispose of it
appropriately.
5.4.5
Exiting the
ProSense™
cryoablation system treatment mode
At the end of the treatment and after removing and disassembling the cryoprobe and
temperature sensor, return to the Main Menu screen by pressing the MAIN MENU icon
on the right lower corner.
Figure 109: Protocol Completed screen.
Pressing on the “Main Menu” icon (
see no. 1)
will load the Main Menu screen.
