Labeller 3-9
ICE Vulcan Service Manual
Connectors
The main controller board provides the following connections.
9
1
2
8
7
3
6
4
5
1.
Encoder
2.
Serial Port (IOIOI)
3.
Input / Output (I/O)
Figure 3-10: Connector
4.
Beacon
5.
Product Detect 2
6.
Product Detect
7.
CLARiTY Display
8.
Ethernet
9.
Ethernet POE
Ports
Connectors
Description
Encoder
Port for connecting a shaft
encoder to the controller to tell
the software how fast the
substrate is traveling.
Serial Port
(IOIOI)
RS-232 Serial Port for connecting
to PC, PLC or other capable
device.
Table 3-1: Controller Connections
Summary of Contents for vulcan
