Ice vulcan, Service Manual

Page: 135 / 252

Rev AA Troubleshooting 6-22
ICE Vulcan Service Manual
Error
No. Error Description Remedial Actions Status
E5030 PrintheadPosition- ShortToGround
‘Printhead Force Fault’
- The printhead force drive has a
fault. This may be caused by a
faulty main circuit board, or the
printhead force motor, or the con-
nections between them. • Power off the machine and
check the con- nections, then re-
try.
• If the problem persists, please
call your local service
representative. The machine will
not run until this fault is resolved.
Fault
E5031 PrintheadPosition-
OpenCircuit
‘Printhead Force Fault’
- The printhead force drive has a
fault. This may be caused by a
faulty main circuit board, or the
printhead force motor, or the con-
nections between them. • Power off the machine and
check the con- nections, then re-
try.
• If the problem persists, please
call your local service
representative. The machine will
not run until this fault is resolved.
Fault
E5032 IntegraPrintheadPosi- tion
‘Printhead Position Fault’ - This
fault may be caused by an object
obstructing the print- head
pressing onto the print roller, or
that the printhead is not mounted
correctly. • This fault may also be due to a
fault with the printhead position
sensor. Check this sensor at T
ools >
Diagnostics > Printhead > lnputs .
• Once resolved and ready, press
the ‘Clear’ button and re-try. If the
problem still persists, please call
your local service representative.
Fault