Ice VAC WD 20, Use And Maintenance Manual

Page: 17 / 32

17
To insert the nylon filter in the collection tank, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see MACHINE SAFETY ’”).
ATTENTION: You are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands .
2. Free the vacuum head from the collection tank by releasing the
hooks (1) on the side of the collection tank ( Fig. 1 ).
3. Using the handle (2) on the vacuum head unit ( Fig.2 ), remove the
vacuum head unit from the collection tank.
INSERTING THE NYLON FILTER (OPTIONAL)
4. Lay the head gently on the floor.
5. Insert the nylon filter in the tank and fix it in place by having it
adhere to the edge of the tank opening.
6. Using the handle (2), on the vacuum tank lid, place the vacuum
tank lid on the collection tank ( Fig.3 ).
7. Secure the vacuum head to the collection tank using the hooks
(1) on the side of the collection tank ( Fig. 4 ).
ATTENTION:
the nylon filter must only be used together with
the filter/float kit or the permanent fabric filter.
To insert the cartridge filter, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see MACHINE SAFETY ’”).
ATTENTION: You are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands .
2. Free the vacuum head from the collection tank by releasing the
hooks (1) on the side of the collection tank ( Fig. 1 ).
INSERTING THE CARTRIDGE FILTER (OPTIONAL)
3. Using the handle (2) on the vacuum head unit ( Fig.2 ), remove the
vacuum head unit from the collection tank.
4. Lay the head gently on the floor.
5. Insert the cartridge filter (3) into the float support (4) ( Fig.3 ).
6. Using the handle (2), on the vacuum tank lid, place the vacuum
tank lid on the collection tank ( Fig.4 ).
7. Secure the vacuum head to the collection tank using the hooks
(1) on the side of the collection tank ( Fig. 5 ).
1 2
2 1
1 3 2 4
1
3
4
2
2
1
1 3 4 2
5