background image

16

The stages for making the appliance safe, thereby making it possible 

to carry out operations safely, are as follows:

1.  Make sure that the main switch (1) is in the rest position, if not, 

disable it by setting the switch to “0” (

Fig.1

).

2.  Make sure that the plug (2) on the power cable (3) has been 

taken out of the mains supply socket (4), and if not, disconnect 

it (

Fig.2

).

3.  Wind the power cable under the appliance’s lifting handle.

APPLIANCE SAFETY

ATTENTION:

  You  are  advised  to  always  wear  protective 

gloves, to avoid the risk of serious injury to your hands

.

ATTENTION:

  To  prevent  any  damage  to  the  mains  socket, 

pull out the plug (2) from the mains socket (4) by pulling the 

plug (2) directly instead of the power cable (3).

PREPARING TO WORK

To  insert  the  paper  collection  bag-filter  inside  the  collection  tank, 

proceed as follows:

1.  Take all necessary steps to ensure that the device is in a safe 

condition (see 

MACHINE SAFETY

’”).

ATTENTION:

  You  are  advised  to  always  wear  protective 

gloves, to avoid the risk of serious injury to your hands

.

INSERTING THE PAPER COLLECTION BAG-FILTER (OPTIONAL)

2.  Free the vacuum head unit from the collection tank by releasing 

the hooks (1) on the side of the collection tank (

 Fig. 1

).

3.  Using the handle (2) on the vacuum head unit (

Fig.2

), remove the 

vacuum head from the collection tank.

4. 

Lay the head gently on the floor.

5. 

Insert the paper collection bag-filter inside the collection tank (3) 

(

Fig.4

),  making  sure  to  insert  the  filter  into  the  vacuum  nozzle 

(4) (

Fig.3

) correctly, being careful not to damage the cardboard 

support (5) in the bag itself (

Fig.4

).

6.  Using the handle (2), on the vacuum tank lid, place the vacuum 

tank lid on the collection tank (

Fig.5

).

7.  Secure the vacuum head to the collection tank using the hooks 

(1) on the side of the collection tank (

 Fig. 6

).

ATTENTION:

 The  paper  collection  bag-filter  should  only  be 

used for collecting solid waste.

ATTENTION:

  When  using  the  paper  collection  bag-filter  do 

not vacuum waste that could cut it, burning embers that could 

set it on fire, or liquid solutions that could dissolve it.

ATTENTION:

 The paper collection bag-filter cannot be used if 

the fabric filter is also used.

1

1

2

OFF

4

2

1

4

5

3

2

3

1

1

5

2

2

6

3

4

Summary of Contents for VAC WD 20

































Reviews: