Ice VAC WD 20, Use And Maintenance Manual

Page: 21 / 32

21
AT THE END OF WORK
At the end of the work, and before carrying out any type of
maintenance, perform the following operations:
1. Do what is required to make sure the machine is in a safe
condition (see MACHINE SAFETY ’”).
2. Take the appliance to the designated place for emptying the
collection tank.
ATTENTION : The place this operation is carried out should
comply with current environmental protection regulations.
3. Empty the collection tank (see the section “ CHECKING AND
CLEANING THE COLLECTION TANK ”).
4. Remove the accessory from the extension, clean under running
water.
ATTENTION : When it is completely dry insert it into the
accessories support at the rear of the collection tank (valid for
P30 and P60 versions), or else insert it into the storage pocket
at the rear of the collection tank (valid for P80 and P100
versions).
5. Remove the female part of the extension from the male part,
clean it under running water.
ATTENTION : When it is completely dry insert it into the
accessories support at the rear of the collection tank (valid for
P30 and P60 versions), or else insert it into the storage pocket
at the rear of the collection tank (valid for P80 and P100
versions).
6. Remove the vacuum hose (1) ( Fig.2 ) from the vacuum nozzle (2)
on the collection tank; before pulling the vacuum hose press the
button (3) for unlocking the catch (
Fig.1
).
7. Remove the front squeegee (if fitted) and clean off any impurities
(read “ OPTIONAL FRONT SQUEEGEE CONTROL AND
CLEANING KIT (TOP P80 AND P100 VERSIONS) ”).
8. Take the appliance to the designated storage area.
ATTENTION : Park the appliance in an enclosed place, on a
flat surface; near the appliance there must be no objects that
could either damage it, or be damaged through contact with it.
RECOMMENDED MAINTENANCE OPERATIONS
MAINTENANCE
3
2
1
1 2
TYPE OF MAINTENANCE
AT THE END OF WORK DAIL
Y
WEEKL
Y
BEFORE A LONG PERIOD WHEN IT WILL NOT BE USED TRANSPORTING
Controlling and cleaning the collection tank X X X X
Controlling and cleaning the vacuum accessories unit X X
Front squeegee optional control and cleaning kit X X X
Controlling and cleaning the fabric filter X X
Controlling and cleaning the sponge filter X X
Controlling and cleaning the float X X
Controlling and cleaning the cartridge filter (optional) X X
Controlling and cleaning the nylon filter X X