background image

8

9

8

9

When disposing of consumption materials, observe the laws and regulations in force. 

When your 

ICE

 machine has reached the end of its long working life, dispose of the materials it contains 

(especially oils and electronic components) in an appropriate manner, and bearing in mind that the machine 

itself was constructed using 100% recyclable materials. 

Only use the brushes supplied with the device, or those specified in the Use and Maintenance Manual 

(page 19). The use of other brushes could compromise safety levels. 

The device must be disconnected from the power supply before removing the battery. 

The battery must be removed from the device before this is disposed of. 

The battery and battery charger must be disposed of in a safe manner by scrupulously comply with 

currently effective laws. 

The machine is not suitable for use by children or people with reduced physical, mental and sensorial 

capacities, or people lacking experience and knowledge, unless supervised and instructed in the use of the 

machine by a person responsible for their safety. 

Children must be supervised to ensure they do not play with the device. 

Summary of Contents for SCRUB 35D





























Reviews: