background image

4

5

4

5

On consignment of the machine

When the machine is delivered to the customer, an immediate check must 

be performed to ensure that all the material mentioned in the shipping 

documents has been received in addition to verifying that the machine 

has not been damaged during transportation. If this is the case, the carrier 

must ascertain the extent of the damage at once, informing our customer 

service office. It is only by prompt action of this type that the missing 

material can be obtained, and compensation for damage successfully 

claimed. 

Serial number plate

Introduction

SCRUB 35D

 is a floor scrubbing machine which, by means of the 

mechanical action of the rotating brush and the chemical action of a 

water/detergent solution, can clean any type of flooring. As it advances, it 

also collects any removed dirt as well as the detergent solution not 

absorbed by the floor. 

The machine must only be used for this purpose.

 Even the best 

machines will only work well if used correctly and kept in good working 

order. We therefore suggest you read this instruction booklet carefully and 

read it again whenever difficulties arise while using the machine. If 

necessary, remember that our customer assistance service (organised in 

collaboration with our dealers) is always available for advice or direct 

intervention. 

Intended use 

The scrubbing machine is designed exclusively for the professional 

cleaning of surfaces and floors in industrial, commercial and public 

environments. The machine is only suitable for use in closed - or at least 

covered  - locations. 

The machine is not suitable for use in the rain, or under water jets. It is 

FORBIDDEN to use the machine for picking up dangerous dusts or 

inflammable liquids in places with a potentially explosive atmosphere. In 

addition, it is not suitable as a means of transport for people or objects. 

Disconnect the quick connector before 

removing the solution tank to gain access to 

the serial number plate (see fig. page 18). 

Summary of Contents for SCRUB 35D





























Reviews: