19
19
DAILY MAINTENANCE
3. REPLACING THE SQUEEGEE RUBBERS
Verify that the state of wear and tear of the squeegee rubbers and, if necessary, replace them. To
replace them you must:
1.
Raise the squeegee
2.
Remove the two knobs
3.
disassemble the squeegee from its support
4.
Remove the tube from the squeegee nozzle so the squeegee can be removed
WARNING:
Before carrying out any type of maintenance,
disconnect the machine's battery connector.
WARNING:
this operation must be carried out by using gloves in
order to protect against contact with dangerous solutions
5.
unscrew the knobs on the squeegee that block the rubber-pressing blades, and remove them
6.
remove the rubber-pressing blades
7.
replace the rubbers
8.
reassemble everything, carrying out the above-mentioned operations in the reverse order
WARNING:
Before carrying out any type of maintenance,
disconnect the machine's battery connector.
WARNING:
this operation must be carried out by using gloves in
order to protect against contact with dangerous solutions
Summary of Contents for SCRUB 35D
Page 26: ...26 26 NOTE...
Page 27: ......
