15
15
WORK
1. PREPARING TO WORK
Before fitting the tanks, it is necessary to carry out certain operations:
5.
Open the two rear hinges of the battery compartment
6.
Connect the connector to the batteries
7.
Close the battery compartment
8.
Position the recovery tank on the handlebars, and connect the two tubes
9.
Position the solution tank and connect the quick connector
10.
carry out the operations to prepare the machine
11.
lower the squeegee command lever in order to start working
12.
press the main switch (1) and check the green indicator light comes on
13.
press the suction switch (2)
14.
press the solenoid valve switch (3)
At this point - by using the operating lever that activates the brushes (4) - the machine can work
efficiently until the detergent solution runs out or the batteries run flat
2. OVERFLOW DEVICE
The machine is fitted with a ball filter which is activated when the recovery tank is full, causing the suction
tube to close.
In this case, you must switch off the machine and empty the recovery tank.
WARNING:
this operation must be carried out by wearing gloves to protect
against contact with dangerous solutions.
4
3
2
1
Summary of Contents for SCRUB 35D
Page 26: ...26 26 NOTE...
Page 27: ......
