26
Autonomous Hard Floor Scrubber Cobi 18
User Manual
Machine Operation in Autonomous Mode
Home Location Code Introduction
Home Location Codes are markers indicating where cleaning routes begin
and end. They are used for establishing the machine’s home location, and
according to the size of the cleaning area, one or several Home Location
Codes are used (6 cleaning routes can be saved for each home location
code). In a building with several floors, a Home Location Code specific to
each floor must be placed.
Place Home Location Codes on walls, columns, etc. in a well lit location and approximately 60 cm from the floor
and approximately 80 cm from the machine.
Placement of Home Location Codes
Approx
80cm / 31.5in
Approx
60cm / 23.6in
• Do not place Home Location Codes where they may be hidden, such as walls behind furniture or shelves.
• Mount the Home Location Code level to the ground and approximately 60cm / 23.6in off the ground, directly
in front of the machine.
• Do not place Home Location Codes in a sleeve or cover, and do not copy on them or laminate them. The
machine may not be able to read altered Home Location Codes.
• Avoid locations exposed to direct sunlight or strong light, and set them where lighting is consistent.
• Leave Home Location Codes permanently mounted. You must place them in the exact location each time. If
codes are not in the exact location, autonomous cleaning will not occur.
• Each location code has an adhesive back, allowing them to be placed directly on walls, etc. Replace with
new location codes if they have lost adhesion. Place location codes on a surface that will not peel when code
is removed. Consult with building manager and place location codes in an approved location. Do not place
on rough surfaces.
