Serious Connections
TM
5
ICCONS™ GAS TOOL GT-3 & GT-3ST USER MANUAL
- This appliance is not intended for
use by person (including children) with
reduced physical, sensory and metal
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
- Children should be supervised to
ensure that they do not play with the
appliance.
Safety for Handling Battery
- Do not short circuit the battery pack.
- Do not pierce or open the battery
pack.
- Do not store the batteries at a
temperature above 50°C.
- Do not incinerate spent batteries.
- Only charge one battery at a time.
- Batteries and charging systems must
be recycled or taken to a designated
disposal area.
Storage
- Store the batteries in a cool and dry
place.
- Over-discharge will degrade the
batteries capacity. Fully charged the
batteries if stored for a long time.
Recharge it in each 3 months can help
to compensate the self-discharged and
keep the battery in a good condition.
- The charging systems should store at
a place out of reach of children. Children
should be supervised to ensure that
they do not play with the appliance.
- Always disconnect the batteries with
tools or charger while stored.
A. GAS NAILER
Model No.
GT-3 / GT-3ST
Dimensions
Length
400 mm
Height
350 mm
Width
100 mm
Weight
3.85 kg
Magazine Capacity
40/30 pins
Recommended Usage 1,200/Hr
5,000/Day
Noise
The noise output of the tool can be
excess of 90dBA, this value can be
higher dependent on the environment in
which the tool is going to be used.
We strongly advise that checks are
made prior to use and the appropriate
ear protection is used.
Vibration
The vibration/mechanical impact risk
is low, it is the users’ responsibility to
ensure that the operators are not put
at risk due to environmental and work
piece specifications.
B. FUEL CELL
Model No. GT-3FUEL
Dimensions
Height
154 mm
Diameter 32mm
* Extension adapter for the fuel cell will
be needed.
2. TECHNICAL SPECIFICATION
