Serious Connections
TM
13
ICCONS™ GAS TOOL GT-3 & GT-3ST USER MANUAL
Follower
holding wrong
at the top of
the pin strip.
Slide follower holder
gently to the bottom
and release to reset
the pin strip in the
magazine.
Jammed
fasteners
Clear jam according to
User Manual.
Possible
reasons
Services
Fuel Cell is
low.
Replace fuel cell
according to User
Manual.
Spark Plug
wire is loose.
Contact authorized
serviceman for repair.
Filter
element is
dirty, causing
tool to over-
heat.
Remove filter
element and clean
according to User
Manual.
Tool sleeve or
O-Rings are
dirty.
Contact authorized
serviceman for repair.
SYMPTOM 3
Operation of the tool is not stable.
SYMPTOM 4
Unstable performance.
Possible
reasons
Services
Built-up dirt
and debris
inside cylinder
Contact authorized
serviceman for repair.
SYMPTOM 5
Diminishing power.
Possible
reasons
Services
Damaged
piston or
cylinder.
Contact authorized
serviceman for repair.
Possible
reasons
Services
Mushrooming
of Piston Tip.
Contact authorized
serviceman for repair.
Exhaust ports
on the sleeve
are dirty or
clogged
Contact authorized
serviceman for repair.
Tool (Sleeve)
or O-Rings are
dirty.
Contact authorized
serviceman for repair.
TROUBLESHOOTING
Returning/Purging Stage of Operation
SYMPTOM 1
Tool operated and drove fastener, but
piston did not return to up position.
SYMPTOM 2
Combustion Chamber does not drop
after tool cycles.
Possible
reasons
Services
Contact arm is
bent, or tool is
dirty.
Clean tool or replace
contact arm as require
