background image

ICCONS Pty Ltd
12-18 Produce Drive
Dandenong South
Victoria, 3175
Australia

Tel: 

+61 (03) 9706 4344

Fax: 

+61 (03) 

Email: [email protected]
Web: www.iccons.com.au

This manual must be observed when 
using the tool. All product designations 
and brand names are the property of 
their owners and are not explicitly 
marked as such.

Amendments to content reserved.

 
Recycle the tool and its packaging in 
an environmentally friendly manner 
in accordance with the recycling 
regulations applicable in your country.

 8 - COPYRIGHT 
Copyright:
ICCONS Pty Ltd
12-18 Produce Drive
Dandenong South
Victoria, 3175
Australia

Passing on and duplication of this      
document, exploitation and disclosure 
of its contents are forbidden unless 
expressly approved. Violations render 
the offender liable to damages. All rights 
reserved for the event of patent, utility 
model or registered design applications.

This operating manual has been drawn 
up with the greatest care. Nevertheless, 
ICCONS Pty Ltd assumes no liability for 
possible errors in this operating manual 
and their consequences. Furthermore, 
no liability is assumed for direct or     
consequential damages resulting from 
the improper use of the tool.

The national safety and occupational 
safety regulations and the safety       
precautions given in this operating 

6 - Disposal

7 - Copyright

Serious Connections

TM

Summary of Contents for GT-3

















Reviews: