33
Instruction Manual C200
PASS.Cd.
For the protection of calibration and / or programming data, password protection
can be activated in this menu.
The numeric display will prompt the assignment of a six-digit password
for password protection of calibration or programming data.
Note :
If the calibration menu or the programming menu is selected later on,
the column gauge prompts the entry of the six-digit password.
( If you have forgotten one or both passwords, use the master password
200879
to access the required menu. )
3.7 Restoring factory settings
In order to reset the column gauge to the factory settings, push and hold the encoder button for approx.
5 seconds on the menu item
BASIC SETUP
(
BASIC SETUP
LED flashes ) until the numeric
display flashes and indicates “
rSt oFF”
.
1. Turn the encoder to select “
rSt. on”
.
2. If the encoder button is pushed with “
rSt. on”
, resetting is confirmed and executed.
3. If the encoder button is pushed with “
rSt. oFF”
, resetting is aborted.