20
Instruction Manual C200
3. Programming the column gauge
The rotary encoder on the front panel is used to make all settings and carry out any programming.
During programming the user is guided through the individual menus, step by step, and prompted by the
LED and numeric displays. The programming procedure follows a logic structure and becomes self-
explanatory after studying it briefly.
Abbreviations used :
Encoder :
Rotary encoder with pushbutton function
CW
:
Turn rotary encoder clockwise
CCW
:
Turn rotary encoder counterclockwise
3.1 Encoder functions
Turning the encoder
By turning the encoder clockwise ( CW ) in the
Measuring Mode
, you can switch
to the
Calibration Mode
or the
Programming Mode
.
In the
Calibration
or
Programming Mode
, the flashing value or function can be
altered by turning the encoder.
CW - increases the value or moves to the next function.
CCW - reduces the value or returns to previous function.
Pushing the encoder
By pushing the encoder button in the
Measuring Mode
, the function selected
in the Basic Setup is executed.
Programming is carried out in the
“BASIC SETUP”
menu, section
“L2
” -
Encoder key
function in measuring mode
.
Push the encoder button in the
Calibration
or
Programming Mode
to accept the
programmed value or the flashing setting respectively.
Push and hold
The six-digit numeric display indicates the column display range in the
for > 2 sec.
Measuring Mode
.
The programmed value of the corresponding, flashing menu LED is displayed for
1 second in the
Programming Mode
.
This is only valid for the values of “NOMINAL SIZE” and “MASTER VALUE”.
Pushing and turning
Switches to and from the activated gauges
C1
to
C8
in the
Measuring Mode
.
The gauges (
C1
to
C8
) are activated in the
“BASIC SETUP
” menu, section
“L0
” –
Activate / deactivate gauges
.
3.2 Foot and hand switch functions
The column gauge allows connecting up to 3 foot or hand switches. The functions of the particular
switches can be assigned in the
“BASIC SETUP
” menu, sections
L3
to
L5
.