
7
Instruction Manual C100
2. Getting started
2.1 Delivered items
The
c
olumn gauge is delivered with a power cable, a footplate ( with 2 screws M3x6 ), an instruction
manual and a programming card.
Further accessories, e.g. foot switches, adapters, etc. as listed in the delivery note.
Please, check the delivery for completeness and save the packaging for future use.
2.2
Fitting the footplate
Fix the footplate to the instrument and place on a sturdy
and level surface.
2.3 Connecting inductive probes
Compare the probe type with the specifications given on the label of the installed measuring module. If they
are compatible, connect them to the A and B or A, B, C and D connectors and secure with the threaded
rings.
Caution !!!
Only fixed connector rings give a good contact to the gauge shield and stable
measurement
values.
Probe A
Probe B
Analogue in / out
OUT = A and B
IN = C and D
Probe A
Probe B
Probe C
Probe D