
3
Instruction Manual C100
1. Introduction
1.1 General information
1.2
Measurement and display features
Manual selection of 1…4 gauges
:
Switching by ENTER key or foot switch
Automatic selection of 1…4 gauges :
Automatic recognition of changes in measurement
values and switching to the active gauge
Units
mm and INCH selectable.
Measuring range / Resolution
± 1,5 mm / 0.1 µm, 0,059 / 0.00001 inch
± 15 mm / 1 µm,
0,59 / 0.0001 inch ( adjustment for long-stroke probes )
Numeric display ranges
Relative measurements ± 9.9999 mm / ±99.999 mm, ±.99999 inch / ±9.9999 inch
Absolute measurements 0...99.9999 mm / 0...999.999 mm, 0...9.99999 inch / 0...99.9999 inch
The column gauge C100 is an electronic gauge supporting
inductive probes, pneumatic converters, as well as
sensors with analogue output voltages.
The compact design of the microprocessor-based electro-
nics allows manual and automatic selection of 1 ... 4
gauges to measure different work pieces or characteristics
in an industrial environment.
Manual gauge selection :
-
Selection of 1...4 different gauges one after the other
by the ENTER-key or foot switch
Automatic gauge selection :
-
Automatic recognition and changes of 1...4 hand
gauges ( bore gauges, air spindles, etc. ) with different
settings.
Highly sophisticated measurement programmes simplify
data acquisition and gauge calibration.
The numeric display is designed for output of absolute or
comparative measurement values and classification of the
machined work pieces.
The three-coloured column display features programmable
tolerance points and supports an accurate assessment of
processing quality. It is an ideal tool for quick quality
checks on multi-gauging applications.
More sophisticated measurement applications are possible
by interconnecting a row of column gauges.