IBP BP 603, Instruction Manual

Page: 49 / 140

19
the memory function 10
The data in the memory will not be lost even when the Blood Pressure Monitor is switched
off. Replacing the batteries will not affect the memory. Date and time will possibly need to be
reset.
You can store your blood pressure reading up to 60 times (blood
pressure and pulse) along with the date and time in the memory.
The measurement values are stored automatically. Should 60
measurement values already be stored in the memory and a new
value is added, the oldest value is deleted.
To retrieve the stored values, press the MEMORY key M . The
average value is indicated in the display. If you press the
MEMORY key M again, the last measurement data stored will
be displayed. Each further press of the MEMORY key M
indicates in numerical order, from 1 to 60, the measurement
values previously obtained each time.
If you press the SET TIME key , the values stored will be
displayed in reverse order.
You have the facility to delete all the data stored. Switch off the
unit and hold down the
MEMORY key M until the display shows
"Clr.".
a)
b)
c)
d)
note:
fig. 12
BP 603 GB_neu 04.01.2005 10:45 Uhr Seite 19