IBP BP 603, Instruction Manual

Page: 43 / 140

13
Before using, insert the connector of the air
hose into the air hose connection of the unit
(
a ). The blood pressure monitor is used as a
desktop/tabletop unit.
Insert the end of the sleeve through the metal
strap so that the sleeve acquires a tunnel
shape (
b ).
Put your left arm through the cuff loop ( c ).
Position the orange sleeve marking at the
middle of the arm, in line with your middle
finger (
d ). Tighten the cuff by pulling the end
of the cuff.
Turn your left palm upward and place the
edge of the arm cuff at approximately 2 to 3
cm above the inner side of the elbow joint (
e ).
If the cuff is not pulled tight you get wrong
measure values.
making a blood pressure measurement 9
a)
b)
c)
d)
e)
9.1 attaching the wrist cuff
2-3 cm
orange sleeve
marking
d
e
c
fig. 4
b a
BP 603 GB_neu 04.01.2005 10:45 Uhr Seite 13