IBM TS4300 3555, User Manual

Page: 118 / 262

Table 35. Main error events (continued)
Event Code
Message Text and
Description
Details and Solution
2028 Move failed inserting cartridge
to slot.
• Check for labels or cartridge misalignments that can prevent
the cartridge from coming out of the slot or drive.
• For proper operation, the accessor must be able to reach the
bottom of the library. Verify that no obstructions exist at the
bottom of the library or on the bottom cover of the library in
the path of the accessor.
1. To check for obstructions at the bottom of the library, first
power off the library by pressing Power for 5 seconds and
select the Default Park location.
2. When the library is powered off, remove the left magazine
of the lowest library module, and verify that the entire area
of the bottom cover is free of any objects that might
obstruct the accessor's path.
3. After obstructions are cleared, replace the magazine, power
the library on, and after the library finishes initialization and
inventory, verify that no further critical events were
generated.
2029 Initialization failure due to
accessor front to back
positioning error.
1. Check for obstructions in the pathway of the accessor such
as a cartridge that is sticking out.
2. Verify the module alignment and frame alignment. Check
whether the accessor is stuck in lock mechanism.
3. Move the accessor apart from lock mechanism and enable
lock mechanism correctly.
2032 Initialization failure due to
accessor rotation positioning
error.
Check for obstructions in the vertical pathway of the accessor,
such as a cartridge that is sitting in the shuttle of the accessor
or any other impedance to accessor movement.
2033 Initialization failure due to
accessor vertical positioning
error.
• Check for obstructions in the vertical pathway of the
accessor such as a cartridge that is sticking out.
• For proper operation, the accessor must be able to reach the
bottom of the library. Verify that no obstructions exist at the
bottom of the library or on the bottom cover of the library in
the path of the accessor.
1. To check for obstructions at the bottom of the library, first
power off the library by pressing Power for 5 seconds and
select the Default Park location.
2. When the library is powered off, remove the left magazine
of the lowest library module, and verify that the entire area
of the bottom cover is free of any objects that might
obstruct the accessor's path.
3. After obstructions are cleared, replace the magazine, power
the library on, and after the library finishes initialization and
inventory, verify that no further critical events were
generated.
2034 Cable to spooling mechanism
is broken during initialization.
Ensure that the spooling mechanism is fully seated in the base
module and connected correctly to the accessor.
88 IBM TS4300 Tape Library Machine Type 3555: User's Guide