IBM TS2250, Setup, Operator, And Service Manual

Page: 32 / 149

Supported servers and operating systems
To determine the latest supported attachments, visit the web at
http://www.ibm.com/storage/lto . For specific instructions about attaching the drive,
see Chapter 2, “Installing the drive,” on page 2-1.
Supported device drivers
Device drivers enable the drive to interact with a variety of servers. To properly
install an IBM device driver (if required), refer to the
IBM Tape Device Drivers
Installation and User's Guide . For applications that use other device drivers, see the
application's documentation to determine which drivers to use.
IBM maintains the levels of device drivers and driver documentation for the drive
on the Internet. You can access this material at the website: http://www.ibm.com/
support/fixcentral
Note: The device driver and driver documentation for the SAS/USB drive is at
http://www.ibm.com/support/fixcentral on the TS2250 web page.
Note: If you do not have Internet access and you need information about device
drivers, contact your Marketing Representative.
Note: The device driver for System i
®
servers is included in the OS/400
®
operating
system.
Specifications
The sections below give the physical, power, and environmental specifications for
the drive. Specifications for tape cartridges are given in “Environmental
specifications” on page 1-7.
Physical specifications
Specification Measurement
Width 213 mm (8.4 in.)
Length 332 mm (13.1 in.)
Height 58 mm (2.3 in.)
Weight (without a cartridge) 4.3 kg (9.4 lbs.)
Power specifications
Power Measurements Drive
AC line current 100 to 240 Vac
Line frequency 50 to 60 Hz, auto-ranging
Line current at 100 Vac 0.48 A
Line current at 240 Vac 0.20 A
1-6
TS2250 Tape Drive Setup, Operator and Service manual
|
|