IBM TS2250, Setup, Operator, And Service Manual

Page: 21 / 149

For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified
cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord,
a maximum of 15 feet in length and a parallel blade, grounding-type attachment
plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and
CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a tandem blade,
grounding-type attachment plug rated 15 amperes, 250 volts.
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set
with a grounding-type attachment plug. The cord set should have the appropriate
safety approvals for the country in which the equipment will be installed.
IBM power cords for a specific country or region are usually available only in that
country or region.
End of life (EOL) plan
This product is a purchased unit. Therefore, it is the sole responsibility of the
purchaser to dispose of it in accordance with local laws and regulations at the time
of disposal.
This product contains recyclable materials. The materials should be recycled where
facilities are available and according to local regulations. In some areas IBM
provides a product take-back program that ensures proper handling of the product.
For more information, contact your IBM representative.
Safety notices
xix