IBM TS2250, Setup, Operator, And Service Manual

Page: 35 / 149

Chapter 2. Installing the drive
This is a customer setup unit. It is the customer's responsibility to install this
product.
Avoiding Drive Damage
To avoid static electricity damage when handling the drive, use the following
precautions:
v
Limit your movement. Movement can cause static electricity to build around
you.
v Always handle the drive carefully. Never touch exposed circuitry.
v
Prevent others from touching the drive.
v Before unpacking and installing the drive into an enclosure, touch its
static-protective packaging to an unpainted metal surface on the enclosure for at
least two seconds. This reduces static electricity in the packaging and your body.
v
When possible, remove the drive from its static-protective packaging and install
it directly into an enclosure without setting it down. When this is not possible,
place the drive's packaging on a smooth, level surface and place the drive on the
packaging.
v
Do not place the drive on the cover of the enclosure or on any other metal
surface.
Installation overview
Installation involves the following steps:
1. “Unpack the Drive”
2. “Verify the Shipment” on page 2-2
3. “Installing a 19-inch rack mount kit (optional)” on page 2-2
4. “Inspect the Power Cord and Outlet” on page 2-3
5. “Position the Tape Drive” on page 2-4
6.
“Install the SAS Host Adapter Card (if required)” on page 2-4
7. “Connecting the SAS bus cable” on page 2-4
8.
“Connecting the USB interface cable (optional)” on page 2-5
9. “Connect Power” on page 2-6
10. “Run drive diagnostics” on page 2-6
11. “Install Device Drivers” on page 2-6
12. “Configure the Tape Drive to a Server/Host” on page 2-7
13. “Updating firmware” on page 2-7
14. “Register for Support Notification ” on page 2-9
Unpack the Drive
Unpack the drive and store the packaging for future moves or shipping.
Attention: If you return the unit for service, ship it in its original or equivalent
packing material, or the warranty may be invalidated.
© Copyright IBM Corp. 2010, 2014
2-1
|